Automatic Pleating Machine

Automatic Pleating Machine

1.Full-auto Rotary ECO Filter Paper Pleating Production Line make use of the upper and lower roller bite to impress on the filter paper,the space of the indentation is equal to the pleat height of the filter element,the wave mechanism receives the wave according to the space between the impression marks of the filter paper,the filter element with good wave passes through the heating mechanism,the filter element completes the setting work under the high temperature of the heating setting mechanism.

2.Insert the cartridge filter paper into the feed shaft and secure with the top cone,the lifting swing arm of the feeding device is lifted onto the feeding rack.The filter paper through the traction tension roll,Adjust the retaining ring on the tension roller according to the width of the filter paper;

3.Adjust slitting knife,the space between the knifes is equal to the width of the filter,after adjustment, the traction filter paper is through the cutting mechanism;The separated filter paper is strengthened by humidifying mechanism and the toughness is enhanced,then the enhanced filter paper passes through the impression roller,adjust the upper and lower impression roller,press the impression roller on the filter paper to press out the appropriate marks.

4.The filter paper that draws traces of the mark to the wave mechanism,the space between the upper and lower spike is adjusted according to the wave height of the filter,The spacing between the upper and lower spike must be centered above the point of the wave roll;After the filter paper waves, it is finalized by heat setting mechanism.