Hepa Pleating Machine

Hepa Pleating Machine

• Maximum width of media pleating 700mm

• Marking rollers assly. pleat depth. 16-100mm.

• Paper roll loading with bearing support

• Paper roll mounted on braking bracket unit

• Media to be used Glass fiber HEPA media

• Media to pass thru Dancing roller

• Machine to stop at the end of roll

• Sensor to sense the roll

• Set of marking roller

• Online Paper slitting arrangement

• Nos of slitting cutters 5nos.

• Quick change of pleat depth from control panel

• Change of pleat depth thru touch screen

• Variable parameters can be set thru touch panel

• Marking roller driven by the servo motor

• Set of idle rollers and paper guiding rollers

• Hot melt dispensing nozzles

• 3-4 set nozzles operated thru One solenoid valve

• Nos of nozzle 24nos on each side

• Hot-melt nozzles and manifold of PHALBOK hot melt unit or Chinese Hot melt unit

• Nozzles mounted on manifold

• Dispensing nozzles to stop dispensing & withdraw automatically as the emergency is pressed

• Manifold to move forward at the me of dispensing

• Manifold to retract back as the dispensing is stopped

• Pleat counter with hot melt spacing(gapping)

• Dispensing to stop after preset pleat count for easier cu ng of pack

• Idle grooved rollers for on line drying of Hot melt.

• Pleat gathering arrangement

• MS pipe fabricated frame work

• Conveyor for moving the pack to next station.

• Total length of conveyor - 1800mm

• Arrangement to adjust the height of conveyor to match the change of pleat depth

• PHALBOK hot melt unit 50L  1nos

• 4 Hose, 16mm, 12 FT

• 2 Gun with 12 modules each, 25mm CD, 1mm p diameter

• Electrically heated tank fitted with cartridge heaters

• Tank thermally insulated

• Digital tank temperature indicator & controller

• Dispensing motor do not start at low temperature

• Low temperature safety inbuilt into system

• Tank coated with Teflon

• Electrically heated hoses with temp. sensing & controlling unit

• Geared motor for the pump

• Pump fitted with AC variable drive

• PID digital temperature indicator and controller for tank, hoses and nozzles

• nozzles opening and closing pneumatically operated

• maximum opera ng temperature 180-200ºC

• Manifold of Hot melt dispensing rollers with temp. indicator and controller

• Pitch of Hot melt dispensing rollers 1” (25.4 mm.)

• Nos of pleat /inch max. 7-8nos.

• Maximum Pleating speed 8-10mtr/min

• Conveyor driven by Servo drive

• Emergency stop at three different places for easy access

• Electrical drives and controls of VEICHI/ DELTA will be used

• Moor of Chinese make,

• Gear boxes of Chinese make

• All drives, touch screen, PLC of VEICHI/ DELTA

• All pneumatics will be of VEICHI/ DELTA

• Terminal will be of Chinese make

• Cable will be of Chinese make

• Control Panel box to be of Chinese make

• Control Panel for the above

• Total wattage 24Kwa s, 440 V, 3 Ph., 50 Hz